QSFP28-100GBase-DAC-CUxxM-FL Quick Spec:
Part Number: QSFP28-100GBase-DAC-CU1M-FL
QSFP28-100GBase-DAC-CU2M-FL QSFP28-100GBase-DAC-CU3M-FL QSFP28-100GBase-DAC-CU4M-FL QSFP28-100GBase-DAC-CU5M-FL
Form Factor: QSFP28-QSFP28 Cable Type: Twinax (DAC)
Rate Category: 100GBase-100GBase Length: 1m, 2m, 3m, 4m, 5m Active/Passive: Passive
QSFP28-100GBase-DAC-CUxxM-FL Features
Up to 100 GBd bi-directional data links
Compliant with QSFP28 MSA specifications
Fully Compliant with IEEE802.3bj specifications
AC coupled inputs and outputs
100 Ohm differential impedance
All-metal housing for superior EMI performance
Single power supply 3.3V, low power consumption
RoHS Compliance
Operating case temperature range: 0 to 70 deg C
QSFP28-100GBase-DAC-CUxxM-FL Applications
100G Ethernet
High performance computing interconnect
Product Description
The FluxLight’s QSFP28-100GBase-DAC-CUxxM-FL is suitable for very short distance and offer a highly cost-effective way to establish a 100-Gigabit link between QSFP28 ports. QSFP28 are designed for a high-density cabling interconnect system capable of delivering an aggregate data bandwidth of 100Gbps. This interconnect system is fully compliant with QSFP28 MSA. The QSFP28 cables support the bandwidth transmission requirements as defined by
IEEE802.3bj(100Gbps) .
Recommended Operating Conditions
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Differential input impedance | Zin | 90 | 100 | 110 | ohm | |
Operating Case Temperature | Topc | 0 | 70 | degC | ||
Storage Temperature | Tst | -40 | 85 | degC | ||
Relative Humidity (non- condensation) | RS | - | 85 | % | ||
Supply Voltage | VCC3 | 3.135 | 3.465 | V | ||
Voltage on LVTTL Input | Vi lvttl | -0.3 | VCC3+0. 2 | V |
Pin Assignment and Description
Pin Assignment
Mechanical Dimensions
ESD
This transceiver is specified as ESD threshold 1kV for SFI pins and 2kV for all other electrical input pins, tested per MIL- STD-883, Method 3015.4 /JESD22-A114-A (HBM). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).