
SFP-H10GB-CU0.5M-FL
10G · SFP+ to SFP+ · DAC (passive copper)0.5m
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
FluxLight's SFP-H10GB-CU4M-FL is a Cisco® compatible SFP+-SFP+ Direct Attached Copper (DAC) Cable and is factory pre-programmed with all the necessary configuration data for seamless network integration. Our cables perform identically to Cisco® original cables and are 100% compatible with other OEM and third party cables. The SFP-H10GB-CU4M-FL is 100% MSA (Multi-Source Agreement) compliant. All FluxLight's cables are tested for 100% functionality and guaranteed compatible for outstanding network performance.
FluxLight offers all brands and form factors of Fiber Optic Transceivers and Cables for all your networking needs. Now you have a reliable, compatible and affordable means to expand your network while maintaining its integrity.
| Parameter | Value |
|---|---|
| Connector A | SFP+ |
| Connector B | SFP+ |
| Cable type | Passive twinax copper |
| Conductor gauge | 26 AWG |
| Cable length | 4 m |
| Differential impedance | 100 Ω (typical) |
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Differential Impedance | TDR | 90 | 100 | 110 | Ω | |
| Insertion loss | SDD21 | -17.04 | dB | At 5.15625 GHz | ||
| Differential Return Loss | SDD11 SDD22 | See Note 1 | dB | At 0.05 to 4.1 GHz | ||
| See Note 2 | dB | At 4.1 to 11.1 GHz | ||||
| Differential to common-mode return loss | SCD11 SCD22 | -10 | dB | At 0.2 to 11.1 GHz | ||
| Common-mode to common-mode output return loss | SCC11 SCC22 | -3 | dB | At 0.01 to 11.1 GHz |
| Feature | Test Method | Performance |
|---|---|---|
| Electrostatic Discharge (ESD) to the Electrical Pins | MIL-STD-883C Method 3015.7 | Class 1(>2000 Volts) |
| Electromagnetic Interference(EMI) | FCC Class B | Compliant with Standards |
| CENELEC EN55022 Class B | ||
| CISPR22 ITE Class B | ||
| RF Immunity(RFI) | IEC61000-4-3 | Typically shows no measurable effect from a 10 V/m field swept from 80 to 1000 MHz |
| RoHS Compliance | RoHS Directive 2011/65/EU and its amendment (EU) 2015/863 | RoHS (EU) 2015/863 compliant |
Units: mm


| PIN # | Symbol | Description | Remarks |
|---|---|---|---|
| 1 | VeeT | Transmitter Ground | |
| 2 | TFAULT | Transmitter Fault | |
| 3 | TDIS | Transmitter Disable | |
| 4 | SDA | Data line for serial ID | |
| 5 | SCL | Clock line for serial ID | |
| 6 | MOD_ABS | Module Absent. Grounded within the module | |
| 7 | RS0 | No connection required | |
| 8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation | |
| 9 | RS1 | No connection required | |
| 10 | VeeR | Receiver Ground | |
| 11 | VeeR | Receiver Ground | |
| 12 | RD– | Receiver Inverted DATA out. AC coupled | |
| 13 | RD+ | Receiver Non-inverted DATA out. AC coupled | |
| 14 | VeeR | Receiver Ground | |
| 15 | VccR | Receiver Power Supply | |
| 16 | VccT | Transmitter Power Supply | |
| 17 | VeeT | Transmitter Ground | |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC coupled | |
| 19 | TD– | Transmitter Inverted DATA in. AC coupled | |
| 20 | VeeT | Transmitter Ground |
The cable assembly's electrical pins are rated Class 1 (>2000 V) for electrostatic discharge per MIL-STD-883C Method 3015.7. Normal ESD precautions are still required during handling. The cable is shipped in ESD-protective packaging and should be removed from it and handled only in an ESD-protected environment.
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
No reviews yet. If you have used this part, yours would be the first.

81 in stock
Order by 3 PM CT for same-day shipping

10G · SFP+ to SFP+ · DAC (passive copper)0.5m

10G · SFP+ to SFP+ · DAC (passive copper)10m

10G · SFP+ to SFP+ · DAC (passive copper)7m

10G · SFP+ to SFP+ · DAC (passive copper)5m