sherriVerified Buyer
Compatible Transceivers
Devices work great, thank you so much.
Loading...
Extreme Compatible
10338-FL Extreme 10338 Compatible 10GBase-T SFP+ 30m RJ45 CAT7 Transceiver Module
- Guaranteed compatible with Extreme
- 10-year warranty
- 30-day money-back guarantee
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
Quick Specs
- Rate Category
- 10G
- Supported Rate(s)
- 10G
- Cable Type
- Copper (RJ-45)
- Form Factor
- SFP+
- Reach
- 30m
- Interface Type
- 10GBASE-T
- Standard/Protocol
- IEEE 802.3an 10GBASE-T; SFP+ MSA
- DDM
- Supported
- Connector Type
- RJ45
- Power Consumption
- 2.5W max
- Operating Temperature
- −5°C to +85°C (EXT)
Overview
FluxLight's 10338-FL is a Extreme Networks® compatible 10GBase SFP+ Electrical Transceiver and is factory pre-programmed with all the necessary configuration data for seamless network integration. Our transceivers perform identically to Extreme Networks® original transceivers and are 100% compatible with other OEM and third party transceivers. The 10338-FL Extreme SFP+ transceiver is 100% MSA (Multi-Source Agreement) compliant. All FluxLight's transceivers are tested for 100% functionality and guaranteed compatible for outstanding network performance.
Applications
- 10GBASE-T Ethernet over Category 6a (or better) copper cable
- Connecting SFP+ switch ports to copper-cabled 10G servers, storage and appliances
- Top-of-rack and in-row data center links up to 30 m
Features
- 10 Gigabit Ethernet (10GBASE-T) over copper twisted-pair cable
- Hot-pluggable SFP+ footprint with compact RJ-45 connector
- Up to 30 m over Category 6a/7 cable
- Compliant with SFP+ MSA and IEEE 802.3 (10GBASE-T)
- Digital Diagnostic Monitoring (DDM) per SFF-8472: module temperature and supply voltage
- Single +3.3 V supply, 2.5 W max
- Operating case temperature: −5°C to +85°C (EXT)
- RoHS compliant and lead-free
- 100% compatible with and programmed for the target OEM platform
- Backed by a FluxLight lifetime warranty
Absolute Maximum Rating
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C |
| Operating Case Temperature | TOP | -5 | 85 | °C |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Current | Is | 700 | 800 | mA | 2.5W max power over full range of voltage and temperature | |
| Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND |
General Specifications
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Data Rate | BR | 10.3125 | Gb/s | IEEE 802.3 compatible. | ||
| Cable Length | L | 30 | m | Category 6a/7 cable |
High-Speed Electrical Signals
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Line Frequency | fL | 800 | MHz | 16-level encoding, per IEEE 802.3, 10GBASE-T | ||
| Tx Output Impedance | Zout,TX | 100 | Ω | Differential | ||
| Rx Input Impedance | Zin,RX | 100 | Ω | Differential | ||
| Differential data input swing | Vinswing | 500 | 1100 | mV | Differential | |
| Differential data output swing | Voutswing | 500 | 1100 | mV | Differential | |
| Tx Input Impedance | Zin | 100 | Ω | Differential | ||
| Rx Output Impedance | Zout | 100 | Ω | Differential | ||
| Rise/Fall Time | Tr,Tf | 25 | 47 | ps | 20%-80% |
Digital Diagnostic Functions
The module supports digital diagnostic monitoring (DDM) over the two-wire serial interface per SFF-8472. As a copper module it has no laser or optical receiver, so it reports module temperature and supply voltage; the laser bias current and optical power fields are not used.
| Parameter | Symbol | Reported |
|---|---|---|
| Module temperature | DMI_Temp | Yes |
| Supply voltage | DMI_VCC | Yes |
| Laser bias current | DMI_Ibias | N/A (copper) |
| TX optical power | DMI_TX | N/A (copper) |
| RX optical power | DMI_RX | N/A (copper) |
Mechanical Dimensions
Units: mm
Pin Assignment and Description
| Pin | Signal Name | Description | Plug Seq. |
|---|---|---|---|
| 1 | VeeT | Transmitter Ground | 1 |
| 2 | TX FAULT | Transmitter Fault Indication | 3 |
| 3 | TX DISABLE | Transmitter Disable | 3 |
| 4 | SDA | SDA Serial Data Signal | 3 |
| 5 | SCL | SCL Serial Clock Signal | 3 |
| 6 | MOD_ABS | Module Absent. Grounded within the module | 3 |
| 7 | RS0 | Not Connected | 3 |
| 8 | LOS | Loss of Signal | 3 |
| 9 | RS1 | Not Connected | 3 |
| 10 | VeeR | Receiver Ground | 1 |
| 11 | VeeR | Receiver Ground | 1 |
| 12 | RD- | Inv. Received Data Out | 3 |
| 13 | RD+ | Received Data Out | 3 |
| 14 | VeeR | Receiver Ground | 1 |
| 15 | VccR | Receiver Power Supply | 2 |
| 16 | VccT | Transmitter Power Supply | 2 |
| 17 | VeeT | Transmitter Ground | 1 |
| 18 | TD+ | Transmit Data In | 3 |
| 19 | TD- | Inv. Transmit Data In | 3 |
| 20 | VeeT | Transmitter Ground | 1 |
- TX Fault is not supported.
- TX Disable as described in the SFP+ MSA is applicable to the 10GBASE-T module.
- MOD_ABS is grounded within the module to indicate that the module is present.
- SCL and SDA are the clock and data lines of the two-wire serial interface for serial ID. They should be pulled up with a 4.7–10 kΩ resistor on the host board.
- RD-/+: These are the differential receiver outputs. They are AC-coupled 100 Ω differential lines which should be terminated with 100 Ω differential at the user SerDes.
- VccR and VccT are the receiver and transmitter power supplies.
- TD-/+: These are the differential transmitter inputs. They are AC-coupled differential lines with 100 Ω differential termination inside the module.
ESD
Normal ESD precautions are required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment.
VDX4
- VDX6710
- VDX6740
- VDX6940 144S
- VDX8770
FluxLight's Full Line of 10GBase-T Optical Transceivers
- AristaSFP-10G-T-A-FL
- AristaSFP-10G-T-A-FLT
- Ruckus10G-SFPP-T-R-FL
- CiscoSFP-10G-T-FL
- CiscoSFP-10G-T-FLT
- Dell407-BBWL-FL
- Dell407-BCFM-FL
- Extreme10338-FL
- IntelE10GSFPT-FL
- JuniperJNP-SFPP-10GE-T-FL
- JuniperJNP-SFPP-10GE-T-FLT
- JuniperSFPP-10GE-T-FL
- Palo AltoPAN-SFP-PLUS-T-FL
Licensing
The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The 10338-FL, like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.
U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)
Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.
Warranty
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Reviews
5 · 3 reviews
CarynVerified Buyer
Extreme Compatible 10338
These modules worked great and we will definitely being buying more from Flux Light.
ChrisVerified Buyer
Excellent value, flawless performance
Works perfectly for a fraction of the price of Extreme Networks OEM modules.
Showing 3 of 3 reviews
Ready to Build Your Network?
Get compatible transceivers and cables shipped fast, with expert support when you need it.
