Juniper Compatible
QSFPP-40GBASE-LR4-FL
40G · QSFP+ · 1310nmSMF · 10km · Duplex LC
$349.99
QSFPP-40GBASE-LR4-FL, Juniper QSFPP-40GBASE-LR4 Compatible 40GBASE-LR4 QSFP+ Transceiver, 1271-1331nm, 10km, SMF, Duplex LCLoading...
Aruba Compatible
JH232A-FL Aruba JH232A Compatible 40GBASE-LR4 QSFP+ Transceiver, 1271-1331nm, 10km, SMF, Duplex LC
- Guaranteed compatible with Aruba
- 10-year warranty
- 30-day money-back guarantee
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
Quick Specs
- Rate Category
- 40G
- Form Factor
- QSFP+
- Interface Type
- 40GBASE-LR4
- Standard/Protocol
- IEEE 802.3ba 40GBASE-LR4
- TX Wavelength
- 1271/
1291/ 1311/ 1331nm (CWDM) - RX Wavelength
- 1271/
1291/ 1311/ 1331nm (CWDM) - Cable Type
- SMF
- Reach
- 10km (SMF)
- DDM
- Supported
- Connector Type
- Duplex LC (UPC)
- Power Consumption
- 3.5W max
- Operating Temperature
- 0°C to +70°C (COM)
Overview
The FluxLight JH232A-FL is an Aruba JH232A compatible 40GBASE-LR4 QSFP+ transceiver for 40 Gigabit Ethernet over single-mode fiber up to 10 km. It transmits on four CWDM wavelengths from 1271 to 1331 nm, uses a duplex LC connector and supports digital diagnostics (DOM).
The JH232A-FL is coded for Aruba and works in the Aruba ports that take the JH232A. Platform Support lists the 21 Aruba platforms it is supported on, with the minimum software for each.
It meets IEEE 802.3ba 40GBASE-LR4, so it links to any 40GBASE-LR4 optic at the far end, whatever its brand. It follows the QSFP+ MSA and reports temperature, supply voltage, laser bias and optical power through SFF-8436 diagnostics. It uses four DFB lasers and PIN receivers, draws at most 3.5 W and is rated for a case temperature of 0 to 70 °C (commercial grade).
FluxLight guarantees it is compatible with Aruba and covers it with a 10-year warranty.
Applications
- 40 Gigabit Ethernet over duplex single-mode fiber up to 10 km
- Switch/router uplinks, campus and inter-building links
- Data center interconnect
Features
- Hot-pluggable QSFP+ footprint with duplex LC receptacle
- Compliant with IEEE 802.3ba 40GBASE-LR4
- 4 × 10.3125 Gb/s electrical interface; 41.25 Gb/s aggregate
- Four CWDM lanes at 1271, 1291, 1311 and 1331 nm; 4-lane DFB transmitter and 4-lane PIN receiver
- Up to 10 km over G.652 single-mode fiber
- Average launch power −7 to +2.3 dBm per lane; receiver sensitivity −11.5 dBm (OMA) per lane
- Real-time Digital Diagnostic Monitoring (DDM/DOM) per SFF-8436
- Single +3.3V power supply, power dissipation ≤ 3.5 W
- Operating case temperature: 0°C to +70°C (COM)
- QSFP+ MSA compliant, RoHS-6 compliant, and Class 1 laser eye safety certified (IEC/EN 60825-1)
- 100% compatible with and programmed for the target OEM platform
- Backed by a FluxLight lifetime warranty
Absolute Maximum Rating
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit | Notes |
|---|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C | |
| Operating Case Temperature | TOP | 0 | 70 | °C | |
| Power Supply Voltage | VCC | 0 | 3.6 | V | |
| Relative Humidity | RH | 5 | 85 | % | Non-condensing |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Operating Case Temperature | TOP | 0 | 70 | °C | |
| Supply Voltage | VCC | 3.15 | 3.3 | 3.45 | V |
| Data Rate (Each Lane) | DR | 10.3125 | Gb/s | ||
| Power Consumption | PC | 3.5 | W | ||
| Supply Current | ICC | 1.1 | A | ||
| Link Distance with G.652 SMF | D | 10 | km |
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Transmitter | ||||||
| Average Output Power, each lane | POUT | -7 | 2.3 | dBm | ||
| Launch Power in OMA minus TDP, each lane | -4.8 | dBm | ||||
| Extinction Ratio | ER | 3.5 | dB | |||
| Total Average Launch Power | PT | 8.3 | dBm | |||
| Center Wavelength, Lane 0 | λ0 | 1264.5 | 1271 | 1277.5 | nm | |
| Center Wavelength, Lane 1 | λ1 | 1284.5 | 1291 | 1297.5 | nm | |
| Center Wavelength, Lane 2 | λ2 | 1304.5 | 1311 | 1317.5 | nm | |
| Center Wavelength, Lane 3 | λ3 | 1324.5 | 1331 | 1337.5 | nm | |
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||
| Transmitter and Dispersion Penalty, each lane | TDP | 2.6 | dB | |||
| Difference in Launch Power between any two lanes (OMA) | 6.5 | dB | ||||
| Optical Return Loss Tolerance | ORLT | 20 | dB | Per IEEE 802.3ba 40GBASE-LR4 | ||
| Transmitter Reflectance | -12 | dB | ||||
| Receiver | ||||||
| Average Receive Power, each lane | Pin | -13.7 | 2.3 | dBm | ||
| Receiver Sensitivity (OMA), each lane | Sen | -11.5 | dBm | |||
| Receive Power, each lane (OMA) | 3.5 | dBm | ||||
| Receiver Damage Threshold, per Lane | PRdmg | 3.3 | dBm | |||
| Center Wavelength (Lanes 0–3) | λ | 1264.5 | 1337.5 | nm | ||
| Receiver Reflectance | RFL | -26 | dB | |||
| LOS Assert | LOSA | -30 | dBm | |||
| LOS De-Assert | LOSD | -12.5 | dBm | |||
| LOS Hysteresis | LOSH | 0.5 | 6 | dB | ||
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Temperature monitor absolute error | DMI_Temp | -3 | 3 | °C |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | 0.1 | V |
| Channel RX power monitor absolute error | DMI_RX_Ch | -3 | 3 | dB |
| Channel bias current monitor absolute error | DMI_Ibias_Ch | -10% | 10% | mA |
| Channel TX power monitor absolute error | DMI_TX_Ch | -3 | 3 | dB |
Mechanical Dimensions
Units: mm
Pin Assignment and Description
| Pin | Logic | Symbol | Description | Plug Sequence |
|---|---|---|---|---|
| 1 | GND | Ground | 1 | |
| 2 | CML-I | Tx2n | Transmitter Inverted Data Input | 3 |
| 3 | CML-I | Tx2p | Transmitter Non-Inverted Data Input | 3 |
| 4 | GND | Ground | 1 | |
| 5 | CML-I | Tx4n | Transmitter Inverted Data Input | 3 |
| 6 | CML-I | Tx4p | Transmitter Non-Inverted Data Input | 3 |
| 7 | GND | Ground | 1 | |
| 8 | LVTTL-I | ModSelL | Module Select | 3 |
| 9 | LVTTL-I | ResetL | Module Reset | 3 |
| 10 | VccRx | +3.3V Power Supply Receiver | 2 | |
| 11 | LVCMOS-I/O | SCL | 2-Wire Serial Interface Clock | 3 |
| 12 | LVCMOS-I/O | SDA | 2-Wire Serial Interface Data | 3 |
| 13 | GND | Ground | 1 | |
| 14 | CML-O | Rx3p | Receiver Non-Inverted Data Output | 3 |
| 15 | CML-O | Rx3n | Receiver Inverted Data Output | 3 |
| 16 | GND | Ground | 1 | |
| 17 | CML-O | Rx1p | Receiver Non-Inverted Data Output | 3 |
| 18 | CML-O | Rx1n | Receiver Inverted Data Output | 3 |
| 19 | GND | Ground | 1 | |
| 20 | GND | Ground | 1 | |
| 21 | CML-O | Rx2n | Receiver Inverted Data Output | 3 |
| 22 | CML-O | Rx2p | Receiver Non-Inverted Data Output | 3 |
| 23 | GND | Ground | 1 | |
| 24 | CML-O | Rx4n | Receiver Inverted Data Output | 3 |
| 25 | CML-O | Rx4p | Receiver Non-Inverted Data Output | 3 |
| 26 | GND | Ground | 1 | |
| 27 | LVTTL-O | ModPrsL | Module Present | 3 |
| 28 | LVTTL-O | IntL | Interrupt | 3 |
| 29 | VccTx | +3.3V Power Supply Transmitter | 2 | |
| 30 | Vcc1 | +3.3V Power Supply | 2 | |
| 31 | LVTTL-I | LPMode | Low Power Mode | 3 |
| 32 | GND | Ground | 1 | |
| 33 | CML-I | Tx3p | Transmitter Non-Inverted Data Input | 3 |
| 34 | CML-I | Tx3n | Transmitter Inverted Data Input | 3 |
| 35 | GND | Ground | 1 | |
| 36 | CML-I | Tx1p | Transmitter Non-Inverted Data Input | 3 |
| 37 | CML-I | Tx1n | Transmitter Inverted Data Input | 3 |
| 38 | GND | Ground | 1 |
ESD
This transceiver is specified as an ESD threshold of 1kV for the high-speed data pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 / JESD22-A114-A (Human Body Model). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD-protective packaging. It should be removed from the packaging and handled only in an ESD-protected environment.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
AOS-S switches4
- 2p 40GbE QSFP+ v3 zl2 ModuleKB.15.17 or later
- 20p PoE+ / 1p 40GbE QSFP+ v3 zl2 ModuleKB.15.17 or later
- 3810M 2QSFP+ 40GbE ModuleAll releases (JL079A not supported in 2930M series nor in 3810M 16SFP+ 2-slot switch (JL075A))
- 3810M/2930M 1QSFP+ 40GbE ModuleAll releases
AOS-CX switches17
- 6300 with QSFP28 ports10.13.1000 (system interface-group command needed for 40G)
- 6400 12p 40G/100G QSFP28 ModuleR0X45A: 10.04.2000; R0X45C: 10.09.1000
- 810010.12.0001 or later
- 8320 32p 40G QSFP+ Switch10.00.0012 or later
- 8320 48p G /6p 40G QSFP+ Switch10.00.0012 or later
- 8320 48p SFP/SFP+ & 6p 40G QSFP+ Switch10.00.0006 or later
- 8325 32C models10.03.0030 or later
- 8325 48Y8C models10.03.0030 or later
- 8325H models10.15.1001 or later
- 8325P 32C models10.15.0001 or later
- 836010.06.0001 or later
- 8360 48Y6C models10.09.0002 or later
- 8400X ModulesJL365A: All releases; JL366A: 10.00.0006
- 930010.11.1000 or later
- 9300S10.14.0005 (port-groups (speed-group 2) must be configured for 40G; center QDD ports 17-24 auto-sense)
- 10000 48Y6C models10.10.0002 or later
- 10040 32C6D models10.16.10xx (40G speed mode must be set on the QSFP interface group; supported in all QSFP and Q-DD ports)
FluxLight's Full Line of 40GBase-LR4 Optical Transceivers
- AristaQSFP-40G-LR4-Arista-FLT
- AristaQSFP-40G-LR4-FL
- ArubaJH232A-FL
- Brocade-Foundry40G-QSFP-LR4-FL
- CiscoQSFP-40G-LR4-FL
- CiscoQSFP-40G-LR4-FLT
- CiscoQSFP-40G-LR4-S-FL
- CiscoQSFP-40G-LR4-S-FLT
- Dell407-BBGN-FL
- Extreme10320-FL
- F5F5-UPG-QSFP+-LR4-FL
- F5OPT-0030-00-FL
- FinisarFTL4C1QE1C-FL
- FortinetFN-TRAN-QSFP+LR-FL
- HPJG661A-FL
- IntelE40GQSFPLR-FL
- JuniperJNP-QSFP-40G-LR4-FL
- JuniperJNP-QSFP-40G-LR4-FLT
- JuniperQSFPP-40GBASE-LR4-FL
- JuniperSRX-QSFP-40G-LR4-FL
- JuniperSRX-QSFP-40G-LR4-FLT
- MerakiMA-QSFP-40G-LR4-FL
- MerakiMA-QSFP-40G-LR4-FLT
- Nokia3HE06485AA-FL
- Palo AltoPAN-QSFP-40GBASE-LR4-FL
Warranty
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Reviews
No reviews yet. If you have used this part, yours would be the first.
Ready to Build Your Network?
Get compatible transceivers and cables shipped fast, with expert support when you need it.
