Juniper Compatible
QSFP-100G-DR-FL
100G · QSFP28 · 1310nmSMF · 500m · Duplex LC
$329.99
QSFP-100G-DR-FL, Juniper QSFP-100G-DR Compatible 100GBase-DR1 QSFP28 1310nm 500m DOM Duplex LC SMF Optical Transceiver ModuleLoading...
Arista Compatible
QSFP-100G-DR-A-FL Arista QSFP-100G-DR Compatible 100GBase-DR1 QSFP28 1310nm 500m DOM Duplex LC SMF Optical Transceiver Module
- Guaranteed compatible with Arista
- 10-year warranty
- 30-day money-back guarantee
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
Quick Specs
- Rate Category
- 100G
- Form Factor
- QSFP28
- Interface Type
- 100GBASE-DR
- Standard/Protocol
- IEEE 802.3cd 100GBASE-DR; 100G Lambda MSA; QSFP28 MSA
- TX Wavelength
- 1311nm
- RX Wavelength
- 1311nm
- Cable Type
- SMF
- Reach
- 500m (SMF)
- DDM
- Supported
- Connector Type
- Duplex LC (UPC)
- Power Consumption
- 4W max
- Operating Temperature
- 0°C to +70°C (COM)
Overview
The FluxLight QSFP-100G-DR-A-FL is a Arista® compatible transceiver module designed for 500m optical communication applications. The module incorporates one channel optical signal, on 1310nm center wavelength, operating at 50Gbaud data rate. The transmitter path incorporates an EML Driver and a cooled EML together. On the receiver path, the input optical signal is coupled to a Pin photodiode detector. A DSP based gearbox is used to convert 4x25Gbps NRZ signals to 1x50Gbaud PAM4 signal. Also a 4-channel retimer and FEC block are integrated in this DSP. The electrical interface is compliant with IEEE 802.3cd and QSFP28 MSA in the transmitting and receiving directions, and optical interface is compliant to IEEE 802.3cd and 100G Lambda MSA with Duplex LC connector. The module has a maximum power consumption of 3.5W.
Applications
- 100 Gigabit Ethernet over duplex single-mode fiber up to 500 m
- Data center interconnect
- Enterprise networking
Features
- Hot-pluggable QSFP28 footprint with duplex LC receptacle
- Compliant with IEEE 802.3cd 100GBASE-DR and the 100G Lambda MSA
- Single 1311 nm wavelength at 53.125 GBd PAM4
- 4 × 25G electrical interface (OIF CEI-28G-VSR) with internal DSP gearbox, retimer and FEC
- Cooled EML transmitter and PIN receiver
- Up to 500 m over single-mode fiber with FEC
- Average launch power −2.9 to +4 dBm; receiver sensitivity max(−3.9, SECQ−5.3) dBm (OMAouter)
- Real-time Digital Diagnostic Monitoring (DDM/DOM)
- Single +3.3V power supply, power dissipation ≤ 4 W
- Operating case temperature: 0°C to +70°C (COM)
- QSFP28 MSA compliant, RoHS compliant, and Class 1 laser eye safety certified (IEC 60825-1)
- 100% compatible with and programmed for the target OEM platform
- Backed by a FluxLight lifetime warranty
Absolute Maximum Rating
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C |
| Operating Case Temperature | TOP | 0 | 70 | °C |
| Power Supply Voltage | VCC | -0.5 | 3.6 | V |
| Relative Humidity | RH | 0 | 85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Operating Case Temperature | TC | 0 | 70 | °C | ||
| Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | |
| Instantaneous Peak Current at Hot Plug | ICC_IP | 1600 | mA | |||
| Sustained Peak Current at Hot Plug | ICC_SP | 1320 | mA | |||
| Maximum Power Dissipation | PD | 4 | W | |||
| Maximum Power Dissipation, Low Power Mode | PDLP | 1.5 | W | |||
| Signaling Rate | SR | 53.125 | GBd | PAM4 | ||
| Control Input Voltage High | VIH | VCC×0.7 | VCC+0.3 | V | ||
| Control Input Voltage Low | VIL | -0.3 | VCC×0.3 | V | ||
| Two-Wire Serial Interface Clock Rate | 400 | kHz | ||||
| Power Supply Noise | 66 | mVpp | 10 Hz – 10 MHz | |||
| Rx Differential Data Output Load | 100 | Ω | ||||
| Operating Distance (SMF) | 500 | m |
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Transmitter | |||||
| Center Wavelength | λC | 1304.5 | 1311 | 1317.5 | nm |
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||
| Average Optical Launch Power | POUT | -2.9 | 4 | dBm | |
| Average Launch Power, Transmitter Off | POUT_OFF | -15 | dBm | ||
| Extinction Ratio | ER | 3.5 | dB | ||
| Outer Optical Modulation Amplitude | OMAouter | -0.8 | 4.2 | dBm | |
| Launch Power in OMAouter minus TDECQ, for ER ≥ 4.5 dB | OMAouter−TDECQ | -2.2 | dBm | ||
| Launch Power in OMAouter minus TDECQ, for ER < 4.5 dB | OMAouter−TDECQ | -1.9 | dBm | ||
| Transmitter and Dispersion Eye Closure for PAM4 | TDECQ | 3.4 | dB | ||
| TDECQ − 10·log10(Ceq) | 3.4 | dB | |||
| Transmitter Transition Time | 17 | ps | |||
| RIN17.1OMA | RIN | -136 | dB/Hz | ||
| Optical Return Loss Tolerance | ORLT | 15.6 | dB | ||
| Transmitter Reflectance | TR | -26 | dB | ||
| Receiver | |||||
| Center Wavelength | λC | 1304.5 | 1311 | 1317.5 | nm |
| Damage Threshold | 5 | dBm | |||
| Average Receive Power | -5.9 | 4 | dBm | ||
| Receive Power (OMAouter) | RP | 4.2 | dBm | ||
| Receiver Reflectance | RR | -26 | dB | ||
| Receiver Sensitivity (OMAouter) | RS | max(-3.9, SECQ-5.3) | dBm | ||
| Stressed Receiver Sensitivity (OMAouter) | SRS | -1.9 | dBm | ||
| Stressed Eye Closure for PAM4 | SECQ | 3.4 | dB | ||
| SECQ − 10·log10(Ceq) | 3.4 | dB | |||
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Temperature monitor absolute error | DMI_Temp | -5 | 5 | °C |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | 0.1 | V |
| Channel RX power monitor absolute error | DMI_RX_Ch | -3 | 3 | dB |
| Channel bias current monitor absolute error | DMI_Ibias_Ch | -10% | 10% | mA |
| Channel TX power monitor absolute error | DMI_TX_Ch | -3 | 3 | dB |
Mechanical Dimensions
Units: mm
Pin Assignment and Description
| Pin | Logic | Symbol | Description | Plug Sequence |
|---|---|---|---|---|
| 1 | GND | Ground | 1 | |
| 2 | CML-I | Tx2n | Transmitter Inverted Data Input | 3 |
| 3 | CML-I | Tx2p | Transmitter Non-Inverted Data Input | 3 |
| 4 | GND | Ground | 1 | |
| 5 | CML-I | Tx4n | Transmitter Inverted Data Input | 3 |
| 6 | CML-I | Tx4p | Transmitter Non-Inverted Data Input | 3 |
| 7 | GND | Ground | 1 | |
| 8 | LVTTL-I | ModSelL | Module Select | 3 |
| 9 | LVTTL-I | ResetL | Module Reset | 3 |
| 10 | VccRx | +3.3V Power Supply Receiver | 2 | |
| 11 | LVCMOS-I/O | SCL | 2-Wire Serial Interface Clock | 3 |
| 12 | LVCMOS-I/O | SDA | 2-Wire Serial Interface Data | 3 |
| 13 | GND | Ground | 1 | |
| 14 | CML-O | Rx3p | Receiver Non-Inverted Data Output | 3 |
| 15 | CML-O | Rx3n | Receiver Inverted Data Output | 3 |
| 16 | GND | Ground | 1 | |
| 17 | CML-O | Rx1p | Receiver Non-Inverted Data Output | 3 |
| 18 | CML-O | Rx1n | Receiver Inverted Data Output | 3 |
| 19 | GND | Ground | 1 | |
| 20 | GND | Ground | 1 | |
| 21 | CML-O | Rx2n | Receiver Inverted Data Output | 3 |
| 22 | CML-O | Rx2p | Receiver Non-Inverted Data Output | 3 |
| 23 | GND | Ground | 1 | |
| 24 | CML-O | Rx4n | Receiver Inverted Data Output | 3 |
| 25 | CML-O | Rx4p | Receiver Non-Inverted Data Output | 3 |
| 26 | GND | Ground | 1 | |
| 27 | LVTTL-O | ModPrsL | Module Present | 3 |
| 28 | LVTTL-O | IntL | Interrupt | 3 |
| 29 | VccTx | +3.3V Power Supply Transmitter | 2 | |
| 30 | Vcc1 | +3.3V Power Supply | 2 | |
| 31 | LVTTL-I | LPMode | Low Power Mode | 3 |
| 32 | GND | Ground | 1 | |
| 33 | CML-I | Tx3p | Transmitter Non-Inverted Data Input | 3 |
| 34 | CML-I | Tx3n | Transmitter Inverted Data Input | 3 |
| 35 | GND | Ground | 1 | |
| 36 | CML-I | Tx1p | Transmitter Non-Inverted Data Input | 3 |
| 37 | CML-I | Tx1n | Transmitter Inverted Data Input | 3 |
| 38 | GND | Ground | 1 |
ESD
This transceiver is specified as an ESD threshold of 1kV for the high-speed data pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 / JESD22-A114-A (Human Body Model). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD-protective packaging. It should be removed from the packaging and handled only in an ESD-protected environment.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
The FluxLight QSFP-100G-DR-A-FL is compatible with the Arista QSFP-100G-DR, which Arista certifies on all its platforms. It works in any Arista switch port that takes the QSFP-100G-DR, running EOS 4.21.3 or later.
FluxLight's Full Line of 100GBase-DR1 Optical Transceiver
- AristaQSFP-100G-DR-A-FL
- CiscoQSFP-100G-DR-S-FL
- JuniperQSFP-100G-DR-FL
Licensing
The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The QSFP-100G-DR-A-FL like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.
U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)
Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.
Warranty
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Reviews
No reviews yet. If you have used this part, yours would be the first.
Ready to Build Your Network?
Get compatible transceivers and cables shipped fast, with expert support when you need it.
