Juniper Compatible
QSFP-100GBASE-LR4-FL
100G · QSFP28 · 1310nmSMF · 10km · Duplex LC
$349.99
QSFP-100GBASE-LR4-FL, Juniper QSFP-100GBASE-LR4 Compatible 100GBASE-LR4 QSFP28 Transceiver, 1295-1309nm, 10km, SMF, Duplex LCLoading...
Ciena Compatible
XCVR-Q10V31-FL Ciena XCVR-Q10V31 Compatible 100GBASE-LR4 QSFP28 Transceiver, 1295-1309nm, 10km, SMF, Duplex LC
- Guaranteed compatible with Ciena
- 10-year warranty
- 30-day money-back guarantee
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
Quick Specs
- Rate Category
- 100G
- Form Factor
- QSFP28
- Interface Type
- 100GBASE-LR4
- Standard/Protocol
- IEEE 802.3ba 100GBASE-LR4, QSFP28 MSA (SFF-8636)
- TX Wavelength
- 1295.56/
1300.05/ 1304.58/ 1309.14nm (LAN-WDM) - RX Wavelength
- 1295.56/
1300.05/ 1304.58/ 1309.14nm (LAN-WDM) - Cable Type
- SMF
- Reach
- 10km (SMF)
- DDM
- Supported
- Connector Type
- Duplex LC (UPC)
- Power Consumption
- 4W max
- Operating Temperature
- 0°C to +70°C (COM)
Overview
The FluxLight XCVR-Q10V31-FL is a Ciena XCVR-Q10V31 compatible 100GBASE-LR4 QSFP28 transceiver for 100 Gigabit Ethernet over single-mode fiber up to 10 km. It transmits on four LAN-WDM wavelengths from 1295.56 to 1309.14 nm, uses a duplex LC connector and supports digital diagnostics (DOM).
The XCVR-Q10V31-FL is coded for Ciena and works in Ciena equipment with ports that take the XCVR-Q10V31.
It meets IEEE 802.3ba 100GBASE-LR4, so it links to any 100GBASE-LR4 optic at the far end, whatever its brand. It follows the QSFP28 MSA and reports temperature, supply voltage, laser bias and optical power through SFF-8636 diagnostics. It uses four DFB lasers and PIN receivers, draws at most 4 W and is rated for a case temperature of 0 to 70 °C (commercial grade).
FluxLight guarantees it is compatible with Ciena and covers it with a 10-year warranty.
Applications
- 100 Gigabit Ethernet over duplex single-mode fiber up to 10 km
- Switch/router uplinks, campus and inter-building links
- Data center interconnect
Features
- Hot-pluggable QSFP28 MSA form factor with duplex LC receptacle
- Compliant with IEEE 802.3ba 100GBASE-LR4
- 103.1 Gb/s aggregate bit rate; 4 × 25G electrical interface (OIF CEI-28G-VSR)
- Four LAN-WDM lanes at 1295.56 / 1300.05 / 1304.58 / 1309.14 nm
- Cooled 4 × 25 Gb/s LAN-WDM DFB transmitter and 4 × 25 Gb/s PIN receiver
- Up to 10 km over G.652 single-mode fiber
- Average launch power −4.3 to +4.5 dBm per lane; receiver sensitivity −8.6 dBm (OMA) per lane
- Real-time Digital Diagnostic Monitoring (DDM/DOM) per SFF-8636
- Single +3.3V power supply, maximum power consumption 4.0 W
- Operating case temperature: 0°C to +70°C (COM)
- RoHS-6 compliant and Class 1 laser eye safety certified (IEC 60825-1)
- 100% compatible with and programmed for the target OEM platform
- Backed by a FluxLight lifetime warranty
Absolute Maximum Rating
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit | Notes |
|---|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C | |
| Operating Case Temperature | TOP | 0 | 70 | °C | |
| Power Supply Voltage | VCC | -0.5 | 3.6 | V | |
| Relative Humidity | RH | 0 | 85 | % | Non-condensing |
| Damage Threshold, each lane | THd | 5.5 | dBm |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Operating Case Temperature | TC | 0 | 70 | °C | |
| Data Rate Accuracy | -100 | 100 | ppm | ||
| Control Input Voltage High | VIH | 2 | Vcc | V | |
| Control Input Voltage Low | VIL | 0.8 | V | ||
| Link Distance with G.652 SMF | D | 10 | km |
Electrical Characteristics
The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | Vcc | 3.135 | 3.465 | V | |
| Supply Current | Icc | 1.15 | A | ||
| Module Total Power | P | 4 | W |
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Center Wavelength, Lane 0 | λ0 | 1294.53 | 1295.56 | 1296.59 | nm |
| Center Wavelength, Lane 1 | λ1 | 1299.02 | 1300.05 | 1301.09 | nm |
| Center Wavelength, Lane 2 | λ2 | 1303.54 | 1304.58 | 1305.63 | nm |
| Center Wavelength, Lane 3 | λ3 | 1308.09 | 1309.14 | 1310.19 | nm |
| Transmitter | |||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||
| Total Average Launch Power | PT | 10.5 | dBm | ||
| Average Launch Power, each lane | PAVG | -4.3 | 4.5 | dBm | |
| Extinction Ratio | ER | 4 | dB | ||
| Average Launch Power OFF Transmitter, each lane | POFF | -30 | dBm | ||
| Receiver | |||||
| Damage Threshold, each lane | THd | 5.5 | dBm | ||
| Average Receive Power, each lane | Pin | -10.6 | 4.5 | dBm | |
| Receiver Sensitivity (OMA), each lane | SEN | -8.6 | dBm | ||
| Receiver Reflectance | RR | -26 | dB | ||
| LOS Assert | LOSA | -24 | dBm | ||
| LOS De-Assert | LOSD | -11.6 | dBm | ||
| LOS Hysteresis | LOSH | 0.5 | dB | ||
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Temperature monitor absolute error | DMI_Temp | -5 | 5 | °C |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | 0.1 | V |
| Channel RX power monitor absolute error | DMI_RX_Ch | -3 | 3 | dB |
| Channel bias current monitor absolute error | DMI_Ibias_Ch | -10% | 10% | mA |
| Channel TX power monitor absolute error | DMI_TX_Ch | -3 | 3 | dB |
Mechanical Dimensions
Units: mm
Pin Assignment and Description
| Pin | Logic | Symbol | Description | Plug Sequence |
|---|---|---|---|---|
| 1 | GND | Ground | 1 | |
| 2 | CML-I | Tx2n | Transmitter Inverted Data Input | 3 |
| 3 | CML-I | Tx2p | Transmitter Non-Inverted Data Input | 3 |
| 4 | GND | Ground | 1 | |
| 5 | CML-I | Tx4n | Transmitter Inverted Data Input | 3 |
| 6 | CML-I | Tx4p | Transmitter Non-Inverted Data Input | 3 |
| 7 | GND | Ground | 1 | |
| 8 | LVTTL-I | ModSelL | Module Select | 3 |
| 9 | LVTTL-I | ResetL | Module Reset | 3 |
| 10 | VccRx | +3.3V Power Supply Receiver | 2 | |
| 11 | LVCMOS-I/O | SCL | 2-Wire Serial Interface Clock | 3 |
| 12 | LVCMOS-I/O | SDA | 2-Wire Serial Interface Data | 3 |
| 13 | GND | Ground | 1 | |
| 14 | CML-O | Rx3p | Receiver Non-Inverted Data Output | 3 |
| 15 | CML-O | Rx3n | Receiver Inverted Data Output | 3 |
| 16 | GND | Ground | 1 | |
| 17 | CML-O | Rx1p | Receiver Non-Inverted Data Output | 3 |
| 18 | CML-O | Rx1n | Receiver Inverted Data Output | 3 |
| 19 | GND | Ground | 1 | |
| 20 | GND | Ground | 1 | |
| 21 | CML-O | Rx2n | Receiver Inverted Data Output | 3 |
| 22 | CML-O | Rx2p | Receiver Non-Inverted Data Output | 3 |
| 23 | GND | Ground | 1 | |
| 24 | CML-O | Rx4n | Receiver Inverted Data Output | 3 |
| 25 | CML-O | Rx4p | Receiver Non-Inverted Data Output | 3 |
| 26 | GND | Ground | 1 | |
| 27 | LVTTL-O | ModPrsL | Module Present | 3 |
| 28 | LVTTL-O | IntL | Interrupt | 3 |
| 29 | VccTx | +3.3V Power Supply Transmitter | 2 | |
| 30 | Vcc1 | +3.3V Power Supply | 2 | |
| 31 | LVTTL-I | LPMode | Low Power Mode | 3 |
| 32 | GND | Ground | 1 | |
| 33 | CML-I | Tx3p | Transmitter Non-Inverted Data Input | 3 |
| 34 | CML-I | Tx3n | Transmitter Inverted Data Input | 3 |
| 35 | GND | Ground | 1 | |
| 36 | CML-I | Tx1p | Transmitter Non-Inverted Data Input | 3 |
| 37 | CML-I | Tx1n | Transmitter Inverted Data Input | 3 |
| 38 | GND | Ground | 1 |
ESD
This transceiver is specified as an ESD threshold of 1kV for the high-speed data pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 / JESD22-A114-A (Human Body Model). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD-protective packaging. It should be removed from the packaging and handled only in an ESD-protected environment.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
FluxLight's Full Line of 100GBase-LR4s
- AristaQSFP-100G-LR4-A-FL
- AristaQSFP-100G-LR4-A-FLT
- Brocade-Foundry100G-QSFP28-LR4-10KM-FL
- Ciena160-9401-900-FL
- CienaXCVR-Q10V31-FL
- CiscoQSFP-100G-LR4-I-FL
- CiscoQSFP-100G-LR4-S-FL
- CiscoQSFP-100G-LR4-S-FLT
- CiscoQSFP-100G-LR-S-FL
- Dell407-BCDH-FL
- Extreme10403-FL
- F5OPT-0039-01-FL
- FinisarFTLC1151RDPL-FL
- FortinetFN-TRAN-QSFP28-LR4-FL
- JuniperJNP-QSFP-100G-LR4-FL
- JuniperJNP-QSFP-100G-LR4-FLT
- JuniperQSFP-100GBASE-LR4-FL
- MerakiMA-QSFP-100G-LR4-FLT
- Nokia3HE10550AA-FL
- Nokia3HE10550AA-IND-FL
- Nokia3HE12229AA-FL
- Nokia3HE12229AA-IND-FL
- Palo AltoPAN-QSFP28-100GBASE-LR4-FL
Licensing
The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The XCVR-Q10V31-FL, like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.
U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)
Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.
Warranty
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Reviews
No reviews yet. If you have used this part, yours would be the first.
Ready to Build Your Network?
Get compatible transceivers and cables shipped fast, with expert support when you need it.
