RickVerified Buyer
No Complaints
No problems to report, and in networking that's always a good thing.
Loading...
Meraki Compatible
MA-SFP-1GB-LX10-FL Meraki MA-SFP-1GB-LX10 Compatible 1000BASE-LX SFP Transceiver, 1310nm, 10km, SMF, Duplex LC
- Guaranteed compatible with Meraki
- 10-year warranty
- 30-day money-back guarantee
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
Quick Specs
- Rate Category
- 1G
- Form Factor
- SFP
- Interface Type
- 1000BASE-LX
- Standard/Protocol
- IEEE 802.3 1000BASE-LX
- TX Wavelength
- 1310nm
- RX Wavelength
- 1310nm
- Cable Type
- SMF
- Reach
- 10km
- DDM
- Supported
- Connector Type
- Duplex LC (UPC)
- Power Consumption
- < 1.0 W
- Operating Temperature
- 0°C to +70°C (COM)
Overview
The FluxLight MA-SFP-1GB-LX10-FL is a Meraki MA-SFP-1GB-LX10 compatible 1000BASE-LX SFP transceiver for Gigabit Ethernet over single-mode fiber up to 10 km. It transmits at 1310 nm, uses a duplex LC connector and supports digital diagnostics (DOM).
The MA-SFP-1GB-LX10-FL is coded for Meraki and works in the Meraki ports that take the MA-SFP-1GB-LX10, including Meraki MS125, Meraki MS130, Meraki MS150 and Meraki MX Security Appliances. Platform Support lists every supported model across 14 platform families.
It meets IEEE 802.3 1000BASE-LX, so it links to any 1000BASE-LX optic at the far end, whatever its brand. It follows the SFP MSA (SFF-8074i) and reports temperature, supply voltage, laser bias and optical power through SFF-8472 diagnostics. It uses an FP laser and a PIN receiver, draws under 1.0 W and is rated for a case temperature of 0 to 70 °C (commercial grade).
FluxLight guarantees it is compatible with Meraki and covers it with a 10-year warranty. The TAA-compliant version is MA-SFP-1GB-LX10-FLT.
Applications
- Gigabit Ethernet over single-mode fiber (1000BASE-LX / LX10)
- Campus and enterprise backbone links
- Building-to-building / inter-building connectivity
- Metro access and service-provider aggregation
- Gigabit uplinks between switches and routers
Features
- Up to 1.25 Gb/s data rate for Gigabit Ethernet
- Compliant with IEEE 802.3 1000BASE-LX (10 km reach per 1000BASE-LX10)
- 1310 nm FP laser transmitter and PIN photodiode receiver
- Up to 10 km over single-mode fiber (SMF)
- Duplex LC connector; hot-pluggable SFP footprint
- Extinction ratio ≥ 9 dB; 14 dB optical link budget
- Digital Diagnostics Monitoring (DDM/DOM) per SFF-8472
- SFP MSA (SFF-8074i) compliant
- AC-coupled CML data interface; single +3.3 V supply, < 1 W
- Class 1 laser safety (IEC/EN 60825-1); RoHS-compliant and lead-free
- 100% compatible with and programmed for the target OEM platform
- Backed by a FluxLight lifetime warranty
Absolute Maximum Rating
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C |
| Operating Case Temperature | TOP | 0 | 70 | °C |
| Power Supply Voltage | VCC | -0.3 | 3.6 | V |
| Relative Humidity (non-condensation) | RH | 5 | 85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Operating Case Temperature | TOP | 0 | 70 | °C | |
| Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V |
| Power Consumption | 1 | W | |||
| Data Rate | DR | 1.25 | Gbps | ||
| Link Distance with SMF | D | 10 | km |
Electrical and Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Transmitter | |||||
| Center Wavelength | λC | 1260 | 1310 | 1360 | nm |
| RMS Spectral Width | λrms | 3.5 | nm | ||
| Average Launch Power | PAVG | -9 | -3 | dBm | |
| Rise/Fall Time | Tr/Tf | 260 | ps | ||
| Extinction Ratio | ER | 9 | dB | ||
| Transmitter Eye Mask | Compliant with IEEE 802.3 standard | ||||
| Receiver | |||||
| Center Wavelength | λC | 1260 | 1580 | nm | |
| Damage Threshold | THd | -1 | dBm | ||
| Receiver Sensitivity | SEN | -23 | dBm | ||
| LOS Assert | LOSA | -45 | dBm | ||
| LOS De-Assert | LOSD | -24 | dBm | ||
| LOS Hysteresis | LOSH | 0.5 | dB | ||
- Class 1 Laser Safety per FDA/CDRH and EN(IEC) 60825 regulations.
- Rise/fall time unfiltered, 20–80%. Complies with the IEEE 802.3 (Gigabit Ethernet) eye mask when filtered.
- Receiver sensitivity measured with PRBS 2⁷−1 at a BER of 1×10⁻¹².
Recommended Interface Circuit
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Temperature monitor absolute error | DMI_Temp | -5 | 5 | °C |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | 0.1 | V |
| RX power monitor absolute error | DMI_RX | -3 | 3 | dB |
| Bias current monitor absolute error | DMI_Ibias | -10% | 10% | mA |
| TX power monitor absolute error | DMI_TX | -3 | 3 | dB |
Mechanical Dimensions
Units: mm
Pin Assignment and Description
| Pin | Signal Name | Description | Plug Seq. | Notes |
|---|---|---|---|---|
| 1 | VeeT | Transmitter Ground | 1 | 1 |
| 2 | TX FAULT | Transmitter Fault Indication | 3 | |
| 3 | TX DISABLE | Transmitter Disable | 3 | 2 |
| 4 | SDA | SDA Serial Data Signal | 3 | 3 |
| 5 | SCL | SCL Serial Clock Signal | 3 | 3 |
| 6 | MOD_ABS | Module Absent. Grounded within the module | 3 | 3 |
| 7 | RS0 | Not Connected | 3 | 4 |
| 8 | LOS | Loss of Signal | 3 | 5 |
| 9 | RS1 | Not Connected | 3 | 4 |
| 10 | VeeR | Receiver ground | 1 | 1 |
| 11 | VeeR | Receiver ground | 1 | 1 |
| 12 | RD- | Inv. Received Data Out | 3 | 6 |
| 13 | RD+ | Received Data Out | 3 | 6 |
| 14 | VeeR | Receiver ground | 1 | 1 |
| 15 | VCCR | Receiver Power Supply | 2 | |
| 16 | VCCT | Transmitter Power Supply | 2 | |
| 17 | VeeT | Transmitter Ground | 1 | |
| 18 | TD+ | Transmit Data In | 3 | 6 |
| 19 | TD- | Inv. Transmit Data In | 3 | 6 |
| 20 | VeeT | Transmitter Ground | 1 |
- Circuit ground is internally isolated from chassis ground.
- Laser output disabled on TDIS > 2.0V or open, enabled on TDIS < 0.8V.
- Should be pulled up with 4.7–10 kΩ on the host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls the line low to indicate the module is plugged in.
- Rate select is not used.
- LOS is an open-collector output. Should be pulled up with 4.7–10 kΩ on the host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
- AC coupled.
ESD
This transceiver is specified as ESD threshold 1kV for high-speed data pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 /JESD22-A114-A (HBM). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
Meraki MS1203
- MS120-8-HW
- MS120-24-HW
- MS120-48-HW
Meraki MS1255
- MS125-24-HW
- MS125-24P-HW
- MS125-48-HW
- MS125-48FP-HW
- MS125-48LP-HW
Meraki MS13011
- MS130-8
- MS130-8P
- MS130-8PI
- MS130-8X
- MS130-12X
- MS130-24
- MS130-24P
- MS130-24X
- MS130-48
- MS130-48P
- MS130-48X
Meraki MS15012
- MS150-24MP-4X
- MS150-24P-4G
- MS150-24P-4X
- MS150-24T-4G
- MS150-24T-4X
- MS150-48FP-4G
- MS150-48FP-4X
- MS150-48LP-4G
- MS150-48LP-4X
- MS150-48MP-4X
- MS150-48T-4G
- MS150-48T-4X
Meraki MS2102
- MS210-24-HW
- MS210-48-HW
Meraki MS2252
- MS225-24-HW
- MS225-48-HW
Meraki MS2502
- MS250-24-HW
- MS250-48-HW
Meraki MS3503
- MS350-24-HW
- MS350-24X-HW
- MS350-48-HW
Meraki MS3554
- MS355-24X-HW
- MS355-24X2-HW
- MS355-48X-HW
- MS355-48X2-HW
Meraki MS3902
- MA-MOD-4x10G
- MA-MOD-8x10G
Meraki MS4102
- MS410-16-HW
- MS410-32-HW
Meraki MS4252
- MS425-16-HW
- MS425-32-HW
Meraki MX Security Appliances10
- MX75-HW
- MX84-HW
- MX85-HW
- MX95-HW
- MX100-HW
- MX105-HW
- MX250-HW
- MX400-HW
- MX450-HW
- MX600-HW
Catalyst 8000 Edge3
- C8235-G2-MX
- C8355-G2-MX
- C8455-G2-MX
FluxLight's Full Line of 1000Base-LX Optical Transceivers
- 3Com3CSFP92-FL
- Alcatel-LucentSFP-GIG-LH40-FL
- Alcatel-LucentSFP-GIG-LX-FL
- Allied TelesisAT-SPLX10-FL
- Allied TelesisAT-SPLX40-FL
- AristaSFP-1G-LX-A-FL
- AristaSFP-1G-LX-A-FLT
- ArubaJ4859D-FL
- ArubaSFP-LX-FL
- AvagoAFCT-5710-FL
- Brocade-FoundryE1MG-LX-OM-FL
- CienaXCVR-010M31-FL
- CiscoGLC-LH-SM-20-FL
- CiscoGLC-LH-SM-40-FL
- CiscoGLC-LH-SMD-FL
- CiscoGLC-LH-SMD-FLT
- CiscoGLC-LH-SM-E-FL
- CiscoGLC-LH-SM-FL
- CiscoGLC-LH-SM-FLT
- CiscoGLC-LX-SM-25-RGD-FL
- CiscoGLC-LX-SM-RGD-FL
- CiscoSFP-GE-L-40-FL
- CiscoSFP-GE-L-FL
- Dell407-BBOO-FL
- D-LinkDEM-310GT-FL
- Extreme10052-FL
- F5F5-UPG-SFPLX-R-FL
- F5OPT-0011-00-FL
- FortinetFN-TRAN-LX-FL
- HPJ4859C-FL
- HPJD119B-FL
- HUAWEILS-SFP-LH-1310-FL
- HUAWEILS-SFP-LX-FL
- IBM90Y9424-FL
- JuniperEX-SFP-1GE-LX40K-FL
- JuniperEX-SFP-1GE-LX-FL
- JuniperEX-SFP-1GE-LX-FLT
- JuniperQFX-SFP-1GE-LX-FL
- JuniperQFX-SFP-1GE-LX-FLT
- JuniperSFP-1GE-LX-FL
- JuniperSFP-1GE-LX-FLT
- JuniperSRX-SFP-1GE-LX-FL
- LinksysLACGLX-FL
- LinksysMGBLH1-FL
- LinksysMGBLX1-FL
- MerakiMA-SFP-1GB-LX10-FL
- MerakiMA-SFP-1GB-LX10-FLT
- NetgearAGM732F-FL
- Palo AltoPAN-SFP-LX-FL
- RuggedComSFP1132-1LX10-FL
- Sonicwall01-SSC-9790-FL
Licensing
The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The MA-SFP-1GB-LX10-FL, like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.
U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)
Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.
Warranty
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Reviews
4.8 · 6 reviews
JoeVerified Buyer
FluxLight Delivers
The FluxLight transceivers have delivered and have worked even in my finicky switches.
RickVerified Buyer
Still going solid.
Many optic in, and still no complaints or problems. So, yeah, good product.
RickVerified Buyer
Things working is always a good thing.
Have installed over 100 of these. Not a single problem yet
RickVerified Buyer
Gets The Job Done
Highest praise I can give - It's cheap and works with now fuss. Will be using them again.
CaseyVerified Buyer
Fast Shipping
Great products, fast shipping
Showing 6 of 6 reviews
Ready to Build Your Network?
Get compatible transceivers and cables shipped fast, with expert support when you need it.
