Juniper Compatible
JNP-QSFP-100G-SR4-FL
100G · QSFP28 · 850nmMMF · 100m · MPO
$79.99
JNP-QSFP-100G-SR4-FL, Juniper JNP-QSFP-100G-SR4 Compatible 100GBASE-SR4 QSFP28 Transceiver, 850nm, 100m, MMF, MPO-12Loading...
Juniper Compatible
QSFP-100GBASE-SR4-FL Juniper QSFP-100GBASE-SR4 Compatible 100GBASE-SR4 QSFP28 Transceiver, 850nm, 100m, MMF, MPO-12
- Guaranteed compatible with Juniper
- 10-year warranty
- 30-day money-back guarantee
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
Quick Specs
- Rate Category
- 100G
- Form Factor
- QSFP28
- Interface Type
- 100GBASE-SR4
- Standard/Protocol
- IEEE 802.3bm 100GBASE-SR4
- TX Wavelength
- 850nm
- RX Wavelength
- 850nm
- Cable Type
- MMF
- Reach
- 70m (OM3), 100m (OM4)
- DDM
- Supported
- Connector Type
- MPO-12 (Female, Flat/
PC) - Power Consumption
- 3.5W max
- Operating Temperature
- 0°C to +70°C (COM)
Overview
The FluxLight QSFP-100GBASE-SR4-FL is a Juniper QSFP-100GBASE-SR4 compatible 100GBASE-SR4 QSFP28 transceiver for 100 Gigabit Ethernet over multimode fiber up to 70 m on OM3 and 100 m on OM4. It transmits at 850 nm, uses an MPO-12 connector and supports digital diagnostics (DOM).
The QSFP-100GBASE-SR4-FL is coded for Juniper and works in the Juniper ports that take the QSFP-100GBASE-SR4, including EX Series, MX Series, PTX Series and SRX Series. Platform Support lists every supported model across 6 platform families.
It meets IEEE 802.3bm 100GBASE-SR4, so it links to any 100GBASE-SR4 optic at the far end, whatever its brand. It follows the QSFP28 MSA and reports temperature, supply voltage, laser bias and optical power through SFF-8636 diagnostics. It uses a VCSEL array and a PIN photodiode array, draws at most 3.5 W and is rated for a case temperature of 0 to 70 °C (commercial grade).
FluxLight guarantees it is compatible with Juniper and covers it with a 10-year warranty. The TAA-compliant version is QSFP-100GBASE-SR4-FLT.
Applications
- 100 Gigabit Ethernet over parallel multimode fiber (100GBASE-SR4)
- Data center short-reach interconnect (spine-leaf, ToR/EoR, switch-to-switch)
- High-density 100G switch and router uplinks / aggregation
- 4 × 25G breakout to 25GBASE-SR (SFP28) via MPO-to-LC breakout cabling
Features
- Hot-pluggable QSFP28 footprint with MPO-12 (female) receptacle
- Compliant with IEEE 802.3bm 100GBASE-SR4
- Four-lane 4 × 25.78125 Gbps (NRZ) design; 100 Gbps aggregate
- 850 nm VCSEL array transmitter and PIN photodiode array receiver
- Parallel multimode fiber over 8-fiber MPO-12; up to 70 m (OM3) / 100 m (OM4)
- Average launch power −8.4 to +2.4 dBm per lane; stressed receiver sensitivity −5.2 dBm (OMA) per lane
- RS-FEC required for full-reach operation
- Real-time Digital Diagnostic Monitoring (DDM/DOM) per SFF-8636
- Single +3.3V power supply, 3.5 W max power dissipation
- QSFP28 MSA compliant, RoHS-6 compliant, and Class 1 laser eye safety certified (IEC/EN 60825-1)
- 100% compatible with and programmed for the target OEM platform
- Backed by a FluxLight lifetime warranty
Absolute Maximum Rating
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C |
| Power Supply Voltage | VCC | 0 | 3.6 | V |
| Relative Humidity | RH | 15 | 85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Operating Case Temperature | TOP | 0 | 70 | °C | ||
| Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | |
| Data Rate (Each Lane) | DR | 25.78125 | Gb/s | |||
| Power Consumption | PC | 3.5 | W | |||
| Link Distance with OM3 | D | 70 | m | Require RS-FEC in host platform | ||
| Link Distance with OM4 | D | 100 | m | Require RS-FEC in host platform |
Electrical Characteristics
The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Differential Data Input Swing | VIN | 100 | 900 | mV | |
| Input Differential Impedance | Zin | 100 | Ω | ||
| Transmitter Disable Voltage | VD | 2.0 | Vcc | V | |
| Transmitter Enable Voltage | VEN | 0 | 0.8 | V | |
| Differential Data Output Swing | VOUT | 300 | 600 | 900 | mV |
| Output Differential Impedance | Zout | 100 | Ω | ||
| LOS Assert Voltage | VLOSA | 2.0 | Vcc | V | |
| LOS De-assert Voltage | VLOSD | 0 | 0.8 | V |
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Transmitter | ||||||
| Average Output Power, each lane | POUT | -8.4 | 2.4 | dBm | ||
| Optical Modulation Amplitude, each lane | OMA | -6.4 | 3 | dBm | ||
| Extinction Ratio | ER | 2 | dB | |||
| Average Output Power (Laser Off) | POFF | -30 | dBm | |||
| Center Wavelength | λ | 840 | 850 | 860 | nm | |
| RMS Spectral Width | σλ | 0.6 | nm | |||
| Optical Return Loss Tolerance | ORLT | 12 | dB | |||
| Transmitter eye mask definition {X1,X2,X3,Y1,Y2,Y3}, Hit ratio 1.5×10⁻³ hits/sample | {0.3, 0.38, 0.45, 0.35, 0.41, 0.5} | |||||
| Receiver | ||||||
| Average Receive Power, each lane | Pin | -10.3 | 2.4 | dBm | ||
| Unstressed Receiver Sensitivity (OMA), each lane | Sen | -7.2 | dBm | BER = 5E-5, measured with PRBS 2³¹−1 at 25.78Gb/s | ||
| Stressed Receiver Sensitivity (OMA), each lane | SRS | -5.2 | dBm | Per IEEE 802.3bm; conformance test signal, BER 5E-5 with RS-FEC | ||
| Receiver Damage Threshold, per Lane | PRdmg | 3.4 | dBm | |||
| Center Wavelength | λ | 840 | 850 | 860 | nm | |
| Receiver Reflectance | RFL | -12 | dB | |||
| LOS Assert | LOSA | -30 | dBm | |||
| LOS De-Assert | LOSD | -13 | dBm | |||
| LOS Hysteresis | LOSH | 0.5 | 2 | 6 | dB | |
Block Diagram of Transceiver
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Temperature monitor absolute error | DMI_Temp | -5 | 5 | °C |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | 0.1 | V |
| Channel RX power monitor absolute error | DMI_RX_Ch | -3 | 3 | dB |
| Channel bias current monitor absolute error | DMI_Ibias_Ch | -10% | 10% | mA |
| Channel TX power monitor absolute error | DMI_TX_Ch | -3 | 3 | dB |
Mechanical Dimensions
Units: mm
Pin Assignment and Description
| Pin | Logic | Symbol | Description | Plug Sequence |
|---|---|---|---|---|
| 1 | GND | Ground | 1 | |
| 2 | CML-I | Tx2n | Transmitter Inverted Data Input | 3 |
| 3 | CML-I | Tx2p | Transmitter Non-Inverted Data Input | 3 |
| 4 | GND | Ground | 1 | |
| 5 | CML-I | Tx4n | Transmitter Inverted Data Input | 3 |
| 6 | CML-I | Tx4p | Transmitter Non-Inverted Data Input | 3 |
| 7 | GND | Ground | 1 | |
| 8 | LVTTL-I | ModSelL | Module Select | 3 |
| 9 | LVTTL-I | ResetL | Module Reset | 3 |
| 10 | VccRx | +3.3V Power Supply Receiver | 2 | |
| 11 | LVCMOS-I/O | SCL | 2-Wire Serial Interface Clock | 3 |
| 12 | LVCMOS-I/O | SDA | 2-Wire Serial Interface Data | 3 |
| 13 | GND | Ground | 1 | |
| 14 | CML-O | Rx3p | Receiver Non-Inverted Data Output | 3 |
| 15 | CML-O | Rx3n | Receiver Inverted Data Output | 3 |
| 16 | GND | Ground | 1 | |
| 17 | CML-O | Rx1p | Receiver Non-Inverted Data Output | 3 |
| 18 | CML-O | Rx1n | Receiver Inverted Data Output | 3 |
| 19 | GND | Ground | 1 | |
| 20 | GND | Ground | 1 | |
| 21 | CML-O | Rx2n | Receiver Inverted Data Output | 3 |
| 22 | CML-O | Rx2p | Receiver Non-Inverted Data Output | 3 |
| 23 | GND | Ground | 1 | |
| 24 | CML-O | Rx4n | Receiver Inverted Data Output | 3 |
| 25 | CML-O | Rx4p | Receiver Non-Inverted Data Output | 3 |
| 26 | GND | Ground | 1 | |
| 27 | LVTTL-O | ModPrsL | Module Present | 3 |
| 28 | LVTTL-O | IntL | Interrupt | 3 |
| 29 | VccTx | +3.3V Power Supply Transmitter | 2 | |
| 30 | Vcc1 | +3.3V Power Supply | 2 | |
| 31 | LVTTL-I | LPMode | Low Power Mode | 3 |
| 32 | GND | Ground | 1 | |
| 33 | CML-I | Tx3p | Transmitter Non-Inverted Data Input | 3 |
| 34 | CML-I | Tx3n | Transmitter Inverted Data Input | 3 |
| 35 | GND | Ground | 1 | |
| 36 | CML-I | Tx1p | Transmitter Non-Inverted Data Input | 3 |
| 37 | CML-I | Tx1n | Transmitter Inverted Data Input | 3 |
| 38 | GND | Ground | 1 |
ESD
This transceiver is specified as an ESD threshold of 1kV for the high-speed data pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 / JESD22-A114-A (Human Body Model). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD-protective packaging. It should be removed from the packaging and handled only in an ESD-protected environment.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
ACX Series7
- ACX710
- ACX5448-D
- ACX5448-M
- ACX6360EOL
- ACX7024
- ACX7332
- ACX7348
EX Series10
- EX4400
- EX4400 Multigigabit
- EX4400-24X
- EX4400-48F
- EX4400-48T
- EX4650-48Y
- EX5200
- EX9204
- EX9208
- EX9214
MX Series14
- MX204
- MX240
- MX301
- MX301-M
- MX304
- MX480
- MX960
- MX2008
- MX2010
- MX2020
- MX10003EOL
- MX10004
- MX10008
- MX10016EOL
PTX Series9
- PTX1000EOL
- PTX3000EOL
- PTX5000EOL
- PTX10002-36QDD
- PTX10002-60CEOL
- PTX10002-60MR
- PTX10003
- PTX10004
- PTX10008
QFX Series7
- QFX5130-32CD
- QFX5130-48C
- QFX5130-48CM
- QFX5130E-32CD
- QFX5230-64CD
- QFX5240-64QD
- QFX5241-64QD
SRX Series8
- SRX2300
- SRX4120
- SRX4300
- SRX4600
- SRX4700
- SRX5400
- SRX5600
- SRX5800
FluxLight's Full Line of 10GBase-SR Transceivers
- AristaQSFP-100G-SR4-A-FL
- AristaQSFP-100G-SR4-A-FLT
- Ruckus100G-QSFP28-SR4-R-FL
- Ciena160-9400-900-FL
- CiscoQSFP-100G-SR4-S-FL
- CiscoQSFP-100G-SR4-S-FLT
- Dell407-BBWV-FL
- Dell407-BCEX-FL
- Extreme10401-FL
- F5OPT-0031-01-FL
- FinisarFTLC9551REPM-FL
- FinisarFTLC9552FEPM-FL
- FinisarFTLC9554REPM-FL
- FortinetFN-TRAN-QSFP28-SR4-FL
- JuniperJNP-QSFP-100G-SR4-FL
- JuniperJNP-QSFP-100G-SR4-FLT
- JuniperQSFP-100GBASE-SR4-FL
- JuniperQSFP-100GBASE-SR4-FLT
- MerakiMA-QSFP-100G-SR4-FLT
- Nokia3HE10051AA-FL
- Nokia3HE10551AA-FL
- Palo AltoPAN-QSFP28-100GBASE-SR4-FL
Licensing
The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The QSFP-100GBASE-SR4-FL, like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.
U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)
Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.
Warranty
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Reviews
No reviews yet. If you have used this part, yours would be the first.
Ready to Build Your Network?
Get compatible transceivers and cables shipped fast, with expert support when you need it.
