The GLC-LH-SMD-FL optical transceiver is ideal for trunking light-to-medium access/aggregation switch traffic on campus networks. This transceiver supports full-duplex 1Gbps transmission over up to 10 kilometers (~6.2 miles) of standard single-mode fiber. While many new access switches support 10Gbps uplinks, lower priced options, like the Cisco Catalyst 9200 product featured in this example, are available at 1Gbps. In this application, traffic aggregated at several Catalyst 9200 switches is redundantly trunked to Cisco Nexus 9396PX core switches.

CORE SWITCH: Cisco Nexus 9396PX

The Nexus® 9396PX platform is part of the latest generation of the fixed Nexus® 9000 Series Switches. Cisco uses the phrase “Application Centric Infrastructure (ACI)” to describe the technology on which this series is based. The primary elements of ACI are,

• Automated IT workflows to shorten application deployment
• Software Defined Networking (SDN)
• Advanced security and analytics
• Seamless application migration across multiple locations

The Cisco Nexus 9396PX Switch is a 2RU switch that supports 1.92 Tbps of throughput. The switch includes 48 SFP+ slots which may be equipped with either SFP or SFP+ modules so both 1G and 10G speeds are possible on a per port basis. 12 fixed QSFP uplink slots are included in the N9372PX. These may be equipped with up to 12 QSFP+ 40GE modules or up to 4 QSFP28 100G modules.

The N9396PX may be equipped with a wide range of optical transceiver interface types across the many rates mentioned above. The tables below include the compatible transceiver types for the two categories of ports in the switch.

Table 1 SFP Optical Transceivers

Table 2 SFP+/SFP28 Optical Transceivers

Table 3 QSFP+ 40G Optical Transceivers

ACCESS SWITCH:  Cisco Catalyst C9200L-24P-4G

Cisco’s Catalyst 9200 series is available in both fixed and modular configurations. The specific model in this example is the C9200-24P-4G. The switch includes 24 POE RJ45 ports and 4 SFP 1GbE slots. The unit may be stacked with other fixed configuration 9200 series models with up to 80 Gbps of stacking bandwidth. The switching capacity is 104 Gbps with a forwarding rate of 154.76 million packets per second (Mpps). Highlights of the Cisco IOS XE software are,

• Automated device provisioning
• API-driven configuration
• Granular visibility (new-real-time network monitoring)
• Seamless software upgrades and patching

The table below shows the range of optical transceivers that may be equipped in the C9200L-24P-4G’s 4 SFP slots.

Table 4 SFP Optical Transceivers

1000BASE-LX DDM OPTICAL TRANSCEIVERS: FluxLight GLC-LH-SMD

FluxLight’s GLC-LH-SMD-FL (click link for datasheet) is a Cisco® compatible 1000Base-LX SFP DDM Optical Transceiver and is factory pre-programmed with all the necessary configuration data for fully compatible operation with all Cisco equipment offering SFP slots. The FluxLight GLC-LH-SMD-FL includes a dual-LC connector and supports full duplex 1GbE over up to 10km single-mode fiber links.

FluxLight’s device performs identically to Cisco® original transceivers, are 100% compatible and support full hot swappable operation. The GLC-LH-SMD-FL is 100% MSA (Multi-Source Agreement) compliant, see: SFP MSA.

The major difference between the GLC-LH-SMD-FL and the GLC-LH-SM is the addition of Digital Diagnostics Monitoring, DDM (also known as Digital Optical Monitoring or DOM) as defined in SFF-8472. DDM allows users to locally or remotely monitor the status of critical operating information in the optical transceiver. Monitored status includes current operation temperature, optical transmit power (dBm), optical receive power (dBm), internal supply voltage (Vdc) and transmit bias current. Along with real-time values for each of these parameters, upper and lower thresholds for both Alarm and Warning levels for each are stored in the module’s internal EEPROM.

OS2 SINGLE MODE FIBER JUMPER CABLE: FluxLight PN: FL-LCLC-DXSM-2M

The GLC-LH-SMD-FL modules equipped in the Cisco Nexus 9396PX and Catalyst C9200 switches offer a duplex LC type connector and utilize single mode fiber (SMF) for transmission. Since this application involves transmission over outside plant fiber across a campus, the optical transceiver modules are typically connected to a nearby optical patch panel using a short single mode jumper cable. An example jumper, shown in the figure above, has dual-LC connectors at each end and is 2 meters long.  If the fiber patch panel is further away or has a connector type other that dual-LC, of course an alternative cables are available, see: FluxLight OS2 fiber jumpers.

Putting it all together

The local network connectivity is achieved by inserting a FluxLight GLC-LH-SMD-FL into each switch and then using an appropriate length Duplex-LC SMF jumper cable to attach to a port on the patch panel, as shown below.

To create a robust network, each C9200 access switch is dual-homed to two Nexus 9396PX switches. Two FluxLight GLC-LH-SMD-FL modules are equipped in the C9200 switches as shown in the diagram below. Since there are three C9200 switches in the example, a total of three GLC-LH-SM modules must be equipped in each of the N9372 switches.

Cisco switches were used to demonstrate the application. FluxLight carries 1000BASE-LX modules compatible with a wide range of OEM switches. Some popular models are listed below.

Table 5 SFP Optical Transceivers for Popular Switch OEMs

FluxLight's Full Line of 1000Base-LX Optical Transceivers

Product Quality

Since its inception in 2004, Fluxlight has continually refined its processes to assure the best possible quality for our customers. The foundational elements of these processes are Record-Keeping and Quality Assurance Testing (QAT). To maintain a robust data archive, each part is individually serialized both in its internal EEPROM memory and on its external label. All QAT results and other important information (e.g., manufacture date, compatibility programming) are associated with each Serial Number stored in our cloud-based secure database. QAT consists of visual part inspection as well as verification of all critical parameters and performance of each part. For the SFP-1G-LX (EMC) optical output power and wavelength (1310nm) are verified on optical spectrum analyzers. Receiver sensitivity is verified at both minimum distance and the 10km maximum range over actual (not simulated) SMF , singlemode fiber cable. In addition, the part is verified for proper operation across its full operating temperature range, 0C to 50C.