Ruckus Compatible
E1MG-BXU-R-FL
1G · SFP (BiDi) · 1310nmSMF · 10km · Simplex LC
$11.99
E1MG-BXU-R-FL, Ruckus E1MG-BXU Compatible 1000BASE-BX10-U BiDi SFP Transceiver, 1310nm TX, 10km, SMF, Simplex LCLoading...
Extreme Compatible
10057-FL Extreme 10057 Compatible 1000BASE-BX10-U BiDi SFP Transceiver, 1310nm TX, 10km, SMF, Simplex LC
- Guaranteed compatible with Extreme
- 10-year warranty
- 30-day money-back guarantee
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
Quick Specs
- Rate Category
- 1G
- Form Factor
- SFP (BiDi)
- Interface Type
- 1000BASE-BX10-U
- Standard/Protocol
- IEEE 802.3ah 1000BASE-BX10-U (Tx 1310 /
Rx 1490 nm); SFP MSA - TX Wavelength
- 1310nm
- RX Wavelength
- 1490nm
- Cable Type
- SMF
- Reach
- 10km (SMF)
- DDM
- Supported
- Connector Type
- Simplex LC (UPC)
- Power Consumption
- < 1.0 W
- Operating Temperature
- 0°C to +70°C (COM)
Overview
The FluxLight 10057-FL is an Extreme 10057 compatible 1000BASE-BX10-U BiDi SFP transceiver for Gigabit Ethernet over a single strand of single-mode fiber up to 10 km. It transmits at 1310 nm and receives at 1490 nm, uses a simplex LC connector and supports digital diagnostics (DOM).
The 10057-FL is coded for Extreme and works in the Extreme ports that take the 10057, including ERS, SLX and MLX. Platform Support lists every supported model across 7 platform families.
It meets IEEE 802.3ah 1000BASE-BX10-U (Tx 1310 / Rx 1490 nm). At the far end it needs a BiDi optic that transmits at 1490 nm and receives at 1310 nm. It follows the SFP MSA (SFF-8074i) and reports temperature, supply voltage, laser bias and optical power through SFF-8472 diagnostics. It uses an FP laser, draws under 1.0 W and is rated for a case temperature of 0 to 70 °C (commercial grade).
FluxLight guarantees it is compatible with Extreme and covers it with a 10-year warranty.
Applications
- Single-fiber Gigabit Ethernet links up to 10 km (1000BASE-BX)
- Fiber conservation: one strand per link instead of two
- Campus, enterprise and building-to-building connectivity
- FTTx and service-provider access networks
Features
- Up to 1.25 Gb/s data rate for Gigabit Ethernet
- 1000BASE-BX single-fiber bidirectional operation: Tx 1310 nm / Rx 1490 nm
- Pairs with the SFP-1G-BX-T14R13-10KM-FL (Tx 1490 nm / Rx 1310 nm)
- 1310 nm Fabry-Perot (FP) laser transmitter
- Up to 10 km over single-mode fiber (SMF)
- Simplex LC connector; hot-pluggable SFP footprint
- Launch power −9 to −3 dBm; receiver sensitivity ≤ −19.5 dBm
- Extinction ratio ≥ 9 dB; 10.5 dB optical link budget
- Digital Diagnostics Monitoring (DDM/DOM) per SFF-8472
- SFP MSA (SFF-8074i) compliant
- AC-coupled CML data interface; single +3.3 V supply, < 1 W
- Operating case temperature: 0°C to +70°C (COM)
- Class 1 laser safety (IEC/EN 60825-1); RoHS-compliant and lead-free
- 100% compatible with and programmed for the target OEM platform
- Backed by a FluxLight lifetime warranty
Absolute Maximum Rating
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C |
| Operating Case Temperature | TOP | 0 | 70 | °C |
| Power Supply Voltage | VCC | -0.3 | 3.6 | V |
| Relative Humidity (non-condensation) | RH | 5 | 85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Operating Case Temperature | TOP | 0 | 70 | °C | |
| Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V |
| Power Consumption | 1 | W | |||
| Data Rate | DR | 1.25 | Gbps | ||
| Link Distance with SMF | D | 10 | km |
Electrical and Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Transmitter | ||||||
| Center Wavelength | λC | 1260 | 1310 | 1360 | nm | |
| RMS Spectral Width | λrms | 3 | nm | |||
| Average Launch Power | PAVG | -9 | -3 | dBm | Per IEEE 802.3ah 1000BASE-BX10 | |
| Rise/Fall Time | Tr/Tf | 260 | ps | |||
| Extinction Ratio | ER | 9 | dB | |||
| Transmitter Eye Mask | Compliant with IEEE 802.3 standard | |||||
| Receiver | ||||||
| Center Wavelength | λC | 1480 | 1490 | 1500 | nm | |
| Receiver Sensitivity | SEN | -19.5 | dBm | Per IEEE 802.3ah 1000BASE-BX10 | ||
| Receiver Overload (average receive power, max) | Psat | -3 | dBm | Per IEEE 802.3ah 1000BASE-BX10 | ||
| Receiver Reflectance | RR | -12 | dB | Per IEEE 802.3ah 1000BASE-BX10 | ||
| LOS Assert | LOSA | -38 | dBm | |||
| LOS De-Assert | LOSD | -24 | dBm | |||
| LOS Hysteresis | LOSH | 0.5 | dB | |||
Recommended Interface Circuit
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Temperature monitor absolute error | DMI_Temp | -5 | 5 | °C |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | 0.1 | V |
| RX power monitor absolute error | DMI_RX | -3 | 3 | dB |
| Bias current monitor absolute error | DMI_Ibias | -10% | 10% | mA |
| TX power monitor absolute error | DMI_TX | -3 | 3 | dB |
Mechanical Dimensions
Units: mm
Pin Assignment and Description
| Pin | Signal Name | Description | Plug Seq. | Notes |
|---|---|---|---|---|
| 1 | VeeT | Transmitter Ground | 1 | 1 |
| 2 | TX FAULT | Transmitter Fault Indication | 3 | |
| 3 | TX DISABLE | Transmitter Disable | 3 | 2 |
| 4 | SDA | SDA Serial Data Signal | 3 | 3 |
| 5 | SCL | SCL Serial Clock Signal | 3 | 3 |
| 6 | MOD_ABS | Module Absent. Grounded within the module | 3 | 3 |
| 7 | RS0 | Not Connected | 3 | 4 |
| 8 | LOS | Loss of Signal | 3 | 5 |
| 9 | RS1 | Not Connected | 3 | 4 |
| 10 | VeeR | Receiver Ground | 1 | 1 |
| 11 | VeeR | Receiver Ground | 1 | 1 |
| 12 | RD- | Inv. Received Data Out | 3 | 6 |
| 13 | RD+ | Received Data Out | 3 | 6 |
| 14 | VeeR | Receiver Ground | 1 | 1 |
| 15 | VccR | Receiver Power Supply | 2 | |
| 16 | VccT | Transmitter Power Supply | 2 | |
| 17 | VeeT | Transmitter Ground | 1 | |
| 18 | TD+ | Transmit Data In | 3 | 6 |
| 19 | TD- | Inv. Transmit Data In | 3 | 6 |
| 20 | VeeT | Transmitter Ground | 1 |
- Circuit ground is internally isolated from chassis ground.
- Laser output disabled on TDIS > 2.0V or open, enabled on TDIS < 0.8V.
- Should be pulled up with 4.7–10 kΩ on the host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls the line low to indicate the module is plugged in.
- Rate select is not used.
- LOS is an open-collector output. Should be pulled up with 4.7–10 kΩ on the host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
- AC coupled.
ESD
This transceiver is specified as ESD threshold 1kV for high-speed data pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 /JESD22-A114-A (HBM). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
ExtremeSwitching (EXOS)20
- 4120
- 4220
- 5120
- 5320
- 5420
- 5520
- 5720
- 7520
- 7720
- V300
- V400
- X435
- X440G2
- X450G2
- X460G2
- X590
- X620
- X670G2
- X690
- X695
Fabric Engine / VSP (VOSS)8
- 4220
- 5320
- 5420
- 5520
- 5720
- 7520
- 7720
- VSP7400 48Y
ERS3
- ERS3600
- ERS4900
- ERS5900
SLX5
- 8520
- SLX9150
- SLX9540
- SLX9640
- SLX9850
MLX2
- CES/CER
- MLXe
BlackDiamond1
- BDX8
Older ExtremeXOS (Summit)2
- X430
- X440
FluxLight's Full Line of 1000Base-BXs
- Alcatel-LucentSFP-GIG-BX-D-FL
- Alcatel-LucentSFP-GIG-BX-U-FL
- Allied TelesisAT-SPBD10-13-FL
- Allied TelesisAT-SPBD10-14-FL
- Brocade-FoundryE1MG-BXD-FL
- Brocade-FoundryE1MG-BXU-FL
- CiscoGLC-BX-D-120-FL
- CiscoGLC-BX-D-20-FL
- CiscoGLC-BX-D-40-FL
- CiscoGLC-BX-D-80-FL
- CiscoGLC-BX-D-FL
- CiscoGLC-BX-D-RGD-FL
- CiscoGLC-BX-U-120-FL
- CiscoGLC-BX-U-20-FL
- CiscoGLC-BX-U-40-FL
- CiscoGLC-BX-U-80-FL
- CiscoGLC-BX-U-FL
- CiscoGLC-BX-U-RGD-FL
- Extreme10056-FL
- Extreme10057-FL
- HPJ9142B-FL
- HPJ9143B-FL
- HPJD098B-FL
- HPJD099B-FL
- JuniperEX-SFP-GE10KT13R14-FL
- JuniperEX-SFP-GE10KT13R15-FL
- JuniperEX-SFP-GE10KT14R13-FL
- JuniperEX-SFP-GE10KT15R13-FL
- JuniperEX-SFP-GE40KT13R15-FL
- JuniperEX-SFP-GE40KT15R13-FL
- Palo AltoPAN-SFP-BXD-20K-FL
- Palo AltoPAN-SFP-BXD-40K-FL
- Palo AltoPAN-SFP-BXU-20K-FL
- Palo AltoPAN-SFP-BXU-40K-FL
Licensing
The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The 10057-FL, like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.
U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)
Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.
Warranty
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Reviews
No reviews yet. If you have used this part, yours would be the first.
Ready to Build Your Network?
Get compatible transceivers and cables shipped fast, with expert support when you need it.
