Always dependable
Another great Cisco compatible SFP. We never have an issue with Fluxlight
Need a larger quantity? Request a quote
Questions? Call (888) 874-7574
The FluxLight GLC-BX-U-FL is a Cisco GLC-BX-U compatible 1000BASE-BX10-U BiDi SFP transceiver for Gigabit Ethernet over a single strand of single-mode fiber up to 10 km. It transmits at 1310 nm and receives at 1490 nm, uses a simplex LC connector and supports digital diagnostics (DOM).
The GLC-BX-U-FL is coded for Cisco and works in the Cisco ports that take the GLC-BX-U, including Catalyst 2960, Catalyst 3560, ASR 9000 and NCS 520 / 540 / 560. Platform Support lists every supported model across 52 platform families.
It meets IEEE 802.3ah 1000BASE-BX10-U (Tx 1310 / Rx 1490 nm). At the far end it needs a BiDi optic that transmits at 1490 nm and receives at 1310 nm, such as the GLC-BX-D-FL. It follows the SFP MSA (SFF-8074i) and reports temperature, supply voltage, laser bias and optical power through SFF-8472 diagnostics. It uses an FP laser, draws under 1.0 W and is rated for a case temperature of 0 to 70 °C (commercial grade).
FluxLight guarantees it is compatible with Cisco and covers it with a 10-year warranty.
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Storage Temperature | TS | -40 | 85 | °C |
| Operating Case Temperature | TOP | 0 | 70 | °C |
| Power Supply Voltage | VCC | -0.3 | 3.6 | V |
| Relative Humidity (non-condensation) | RH | 5 | 85 | % |
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Operating Case Temperature | TOP | 0 | 70 | °C | |
| Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V |
| Power Consumption | 1 | W | |||
| Data Rate | DR | 1.25 | Gbps | ||
| Link Distance with SMF | D | 10 | km |
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Transmitter | ||||||
| Center Wavelength | λC | 1260 | 1310 | 1360 | nm | |
| RMS Spectral Width | λrms | 3 | nm | |||
| Average Launch Power | PAVG | -9 | -3 | dBm | Per IEEE 802.3ah 1000BASE-BX10 | |
| Rise/Fall Time | Tr/Tf | 260 | ps | |||
| Extinction Ratio | ER | 9 | dB | |||
| Transmitter Eye Mask | Compliant with IEEE 802.3 standard | |||||
| Receiver | ||||||
| Center Wavelength | λC | 1480 | 1490 | 1500 | nm | |
| Receiver Sensitivity | SEN | -19.5 | dBm | Per IEEE 802.3ah 1000BASE-BX10 | ||
| Receiver Overload (average receive power, max) | Psat | -3 | dBm | Per IEEE 802.3ah 1000BASE-BX10 | ||
| Receiver Reflectance | RR | -12 | dB | Per IEEE 802.3ah 1000BASE-BX10 | ||
| LOS Assert | LOSA | -38 | dBm | |||
| LOS De-Assert | LOSD | -24 | dBm | |||
| LOS Hysteresis | LOSH | 0.5 | dB | |||

The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Temperature monitor absolute error | DMI_Temp | -5 | 5 | °C |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | 0.1 | V |
| RX power monitor absolute error | DMI_RX | -3 | 3 | dB |
| Bias current monitor absolute error | DMI_Ibias | -10% | 10% | mA |
| TX power monitor absolute error | DMI_TX | -3 | 3 | dB |
Units: mm


| Pin | Signal Name | Description | Plug Seq. | Notes |
|---|---|---|---|---|
| 1 | VeeT | Transmitter Ground | 1 | 1 |
| 2 | TX FAULT | Transmitter Fault Indication | 3 | |
| 3 | TX DISABLE | Transmitter Disable | 3 | 2 |
| 4 | SDA | SDA Serial Data Signal | 3 | 3 |
| 5 | SCL | SCL Serial Clock Signal | 3 | 3 |
| 6 | MOD_ABS | Module Absent. Grounded within the module | 3 | 3 |
| 7 | RS0 | Not Connected | 3 | 4 |
| 8 | LOS | Loss of Signal | 3 | 5 |
| 9 | RS1 | Not Connected | 3 | 4 |
| 10 | VeeR | Receiver Ground | 1 | 1 |
| 11 | VeeR | Receiver Ground | 1 | 1 |
| 12 | RD- | Inv. Received Data Out | 3 | 6 |
| 13 | RD+ | Received Data Out | 3 | 6 |
| 14 | VeeR | Receiver Ground | 1 | 1 |
| 15 | VccR | Receiver Power Supply | 2 | |
| 16 | VccT | Transmitter Power Supply | 2 | |
| 17 | VeeT | Transmitter Ground | 1 | |
| 18 | TD+ | Transmit Data In | 3 | 6 |
| 19 | TD- | Inv. Transmit Data In | 3 | 6 |
| 20 | VeeT | Transmitter Ground | 1 |
This transceiver is specified as ESD threshold 1kV for high-speed data pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 /JESD22-A114-A (HBM). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment.
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The GLC-BX-U-FL, like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.
U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)
Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.
This part is covered by our Limited Lifetime Warranty, a 10-year serviceable lifetime, and our 30-Day Money-Back Guarantee. Read the full warranty and return terms.
Another great Cisco compatible SFP. We never have an issue with Fluxlight
Our go to for for Optical Transceivers. Great Service and Products!
We have been using the FluxLight GBICs for many years, and we continually have great success with these products. We not only save money by using the FluxLight products, but we know we can count on the products to work exactly the way they are expected to.
We have been using FluxLight GBICs for years. We are primarily a Cisco shop, and FluxLight GBICs have always worked great for us. The price is extremely reasonable and you get a quality product.
These devices perform identically to their Cisco counterpart. No hassle, no special configs... Just plug and play.
They work great for us!
I'm happy with our purchase of the GLC-BX-U. The SFP module meets 1000BASE-BX-U standards. We already had the -D taken care of and I didn't want to have to do a lot of fine-tuning to get it to work with our system. Fluxlight's GLC-BX-U fit the bill perfectly.
Tap into the possibilities of networking with the GLC-BX-U. This handy transceiver is highly compatible with different modules to suit your needs. You can get much faster speeds with this versus prior incarnations. It's a great upgrade for a business! You can't go wrong with the reliability and pricing at Fluxlight.
The GLC-BX-U has been a really reliable product for us thus far. It has a single port for single mode fiber, very simple but efficient. It has an LC connector that's snug and works quite well. Installing the device into the system wasn't hard, as the whole thing is pretty user-friendly if yo know what you're doing. A reliable part for any computer network.
Bidirectional and flexible, the GLC-BX-U is a device I use often in work. It's compatible with a lot of different networks and devices, thanks to its single mode optical connection. The LC optical interface is great, and it also works as a standard SFP transceiver. There's only a single connection, but other than that this is a really great product.
Showing 10 of 13 reviews


205 in stock
Order by 3 PM CT for same-day shipping

1G · SFP (BiDi) · 1310nmSMF · 10km · Simplex LC

1G · SFP (BiDi) · 1310nmSMF · 10km · Simplex LC

1G · SFP (BiDi) · 1310nmSMF · 10km · Simplex LC

1G · SFP (BiDi) · 1310nmSMF · 20km · Simplex LC